We can help reduce your carbon footprint.

• 7kW at 32A 1 phase (25-30 miles of driving per hour of charge)
• 11/22kW at 32A 3 phase (70-90 miles of driving per hour of charge)
• Up to 7x faster than a 3-pin plug
• Powered by ev.energy - scheduled charging, green tariff integration & energy monitoring/analytics
• ev.energy solar charging integration
• waEV-card RFID secure charging (2 x waEV-cards included)
• EVHS & WCS, OZEV approved (eligible for £350 grand funding, saving purchase & install costs)

• WiFi, Bluetooth & LAN
• O-PEN protection (no earth rod required)
• 3 year warranty
• Compatible with all plug-in vehicle brands

Dimensions

• EV1 Unit - 361mm x 250mm x 100mm
• Outer Box - 497mm x 348mm x 242mm

Optional/Future upgrades

• MID smart meter
• Solar integration (CT)
• OCPP 2.0
• ISO15118 - Vehicle-to-grid (V2G) plug & charge functionality. 

Short charging time and savings

• Faster charging up to 7.4kW
• Smart scheduling for energy and cost savings
• Easy indoor and outdoor installation
• Voice control enabled with Amazon Alexa and Google Assistant devices
• Integrated PEN fault protection. No earthing rod needed
• Compatible with all Wallbox Energy Management Solutions, including Eco-Smart solar EV charging, power boost dynamic load balancing and power sharing

• Connector type Type 2
• Maximum current32 A, 5x10 mm² cable
• DC Leakage protection Included Yes
• User interface myWallbox Portal, Wallbox App
• Overvoltage Category CAT III
• Storage temperature From -40ºC to 70ºCRCC
• Maximum output 7.4kW / 22kW Input voltage110 / 230 V AC ± 10% (1P) / 400 V AC ± 10% (3P)Dimensions166x163x82mm
• Charging mode Mode 3
• Charger status information Halo RGB LED, Wallbox App, myWallbox Portal

• Integrated open PEN conductor protection, i.e., no need for earth rod
• Fully dynamic charging power 1.4–7.4 kW
• Load balancing of up to 3 units per fuse by integrated wireless communication
• Automatic queuing system
• Offline proof load balancing
• Integrated eSIM in each box, lifetime free subscription
• Possibility of WiFi connection
• Permanent locking of the Type 2 cable
• Integrated earth fault protection (RCD)
• Cable not included
• 3 Year Warranty
• Always updated with the charging robot
• 69% smaller than other chargers weighs only 1.5kg

With the Easee app it is possible to control and plan when your car is charging. You can see live values for the current charge session and get an overview of your consumption. If you want to avoid finding the charging cable every time you charge the car, you can easily lock the cable permanently in the Charging Robot through the app. You get full control over who can charge and when they can charge. We update the app periodically to make your Charging Robot even smarter. Additionally, with the Easee API further integrations and extended possibilities are available.

We’ve added 3 extra levels of security, so that we can sleep well at night, knowing that you can do it too. Safety is an important part of the design. With an Easee Charging Robot you can be assured that charging is done safely. The Charging Robot is designed to the latest standards. In addition, there is built-in electronic earth fault protection that ensures detection of DC and ground faults. The Charging Robot is also equipped with temperature sensors and protection to prevent overheating. You also don’t have to worry about crooks, the charging cable can be permanently locked in the box via the app or the local WiFi interface.

• 3 Charging Modes: ECO, ECO+ and
• FAST Tap Operated Display Backlight
• Optimises Microgeneration Self-consumption
• Built-in RCD Protection
• Works with Solar PV or Wind Turbine Systems
• Integral Cable Holster (Tethered Version)
• Economy Tariff Sense Input
• Remote Control & Monitoring
• Programmable Timer Function
• Supplied with Clip-on Grid Sensor(s)
• Charge & Event Logging
• Works Alongside Battery
• Storage System Pin-code
• Lock Function
• Future Proof Installation OZEV (Home/Work Scheme)
• Approved 3 Year Warranty Ethernet Port and built-in WiFi for Connecting to the Internet Complies with CE and UKCA Requirements

Charging Modes

ECO MODE

Charge power is continuously adjusted in response to changes in generation or power consumption elsewhere in the home. Charging will continue until the vehicle is fully charged, even if power is drawn from the grid.

ECO PLUS

Charge power is continuously adjusted in response to changes in generation or power consumption elsewhere in the home. Charging will pause if there is too much imported power, continuing only when there is surplus free power available.



FAST

In this mode, the vehicle will be charged at maximum power. This is just like an ordinary Mode 3 charging point.  

Hypervolt has developed a flawless, smart, and beautifully-designed charger that meets all your domestic charging needs.Charge faster, smarter and in style with the most advanced charger on the market. 

The Hypervolt home 2.0 is a wall-mounted EV charger with a 5m tethered lead, available in both type 1 and 2 variants. The tethered lead is wrapped around the Hypervolt unit quite discretely with the ability to stow the connector in a wall-mounted holster (included) The Hypervolt is constructed from ABS composite and is extremely durable in all weather conditions with an IP54 rating. Charging at the standard 7kW (32A at 230v) with options to reduce this in-app, or using the new automatic load management feature.

• Scheduled charging.
• Device lock/unlock.
• Real-time energy metrics.
• Extensive charging analytics.
• View load management events.
• LED Brightness Control.
• Control solar charging.



• Voice control your Hypervolt charger.
• “Alexa, ask my Hypervolt to set brightness to the maximum”.
• “Alexa, ask my Hypervolt current status”.
• Enable it with a few clicks directly from the Alexa app.
• 243mm wide.
• 328mm tall.
• 101mm deep.